Plumbing Training Schools near Addison AL 35540

How to Select a Plumbing Tech School near Addison Alabama

Addison AL plumber adjusting pipe on sinkThe initial step to becoming a plumbing contractor or tradesman is enrolling in a plumbing trade school near Addison AL. But with so many vocational schools to choose from, just how do you tackle making certain that you enroll in the best one? Particularly since there are a number of factors to consider. For example, many potential students will commence by looking for schools that are close to their home. When they have identified a few that are within driving distance, they will select the one with the lowest tuition. Even though cost and location are of importance, they are not the only qualifications that should be considered. Also important are the accreditation and reputations of the schools, along with their graduation and job placement rates. These and other qualifications should contribute toward your ultimate decision when choosing a plumbing training school. We will address that checklist in more detail later in this post. But first, let’s review a little bit about becoming a plumber and the educational options that are accessible.

Becoming a Plumber

Addison AL plumber installing new faucetAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A plumber in Addison AL will typically advance through three phases during their professional career.

  • Apprentice. The majority of plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam.    Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Addison AL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Plumbing Certificate and Degree Programs

Addison AL plumbing tools and blueprintsThere are several options available to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a Addison AL area community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some Alabama colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Vocational Schools

Now that you have decided to obtain a diploma, certificate or degree, you can begin to refine your school options. Considering that there are so many Alabama plumbing vocational and trade schools in the Addison AL area, it’s important to have a checklist of criteria that each school must satisfy. The first two that we discussed were location and tuition expense. And even though both qualifiers may be important when making your decision, there are additional factors that need to be considered also. Below is a checklist of those additional qualifications that you will need to analyze prior to enrolling in a plumber tech school.

Is the Plumbing School Accredited?  A large number of Addison AL area plumbing technical schools have attained either a regional or a national accreditation. They can acquire Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which pertains to an individual program, for example plumbing technology. Make certain that the program and school are accredited by a U.S. Department of Education approved accrediting organization, such as the Accreditation Board for Engineering and Technology. Along with helping make certain that you obtain an excellent education, it may help in obtaining financial aid or student loans, which are often not available for non-accredited Alabama schools. Also, a number of states mandate that the plumbing training program be accredited for it to be approved for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of determining if a trade school near Addison AL you’re reviewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Alabama Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Alabama schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are looking at what their completion rates are. The completion rate is the portion or percentage of students who enroll in and finish the program. A lower completion rate may indicate that students were unhappy with the program and dropped out. It might also indicate that the instructors were not competent to train the students. It’s similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a broader list of alumni, which may produce more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate will not only validate that the school has a good reputation within the industry, but also that it has the network of Addison AL area contacts to help graduates obtain apprenticeships or jobs.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught together with an internship or an apprenticeship program. Those participating Addison AL area vocational and technical schools will help place you in an apprenticeship program inside their network of plumbing businesses or trade unions. Ask if the schools you are considering have working relationships with regional plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by providing hands-on training, but it also provides job opportunities and helps to establish relationships in the area plumbing professional community.

Are there Modern Facilities?  Make certain that the campus facilities and the equipment that you will be trained on are up-to-date and what you will be working with in the field. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working under regarding what you should be expecting. If not, ask a local Addison AL plumbing company if they can provide some suggestions.

Where is the School Located?  Unless you are willing to move, the school must be within commuting distance of your Addison AL home. Take note that if you decide to enroll in an out-of-state school, besides the added relocation costs there can be higher tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you receive as much personalized training as possible, which can be difficult in larger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Talk to some of the students and get their comments concerning class sizes and instruction. Finally, talk to some of the instructors and learn what their level of experience is in Alabama and what certifications or degrees they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the schools you are reviewing are flexible enough to handle your needs. If you can only attend classes at night or on weekends near Addison AL, verify that the programs you are looking at offer those options.  Also, if you can only attend on a part-time basis, make certain that the school you select offers part-time enrollment. Finally, find out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Why Did You Decide to Become a Plumber?

When preparing to interview for a Plumbing position, it's helpful to review questions you might be asked. One of the questions that interviewers frequently ask Plumbing applicants is "What drove you to decide on Plumbing as a profession?". What the interviewer is trying to uncover is not just the personal reasons you may have for becoming a Plumber, but also what attributes and skills you possess that make you good at your profession. You will probably be asked questions pertaining exclusively to Plumbing, as well as a certain number of general interview questions, so you need to prepare some strategies about how you want to respond to them. Considering there are numerous factors that go into selecting a career, you can address this fundamental question in a multitude of ways. When preparing an answer, attempt to include the reasons the work interests you as well as the strengths you have that make you an exceptional Plumber and the ideal choice for the position. Don't make an effort to memorize a response, but take down a few concepts and talking points that relate to your personal experiences and strengths. Reviewing sample answers can help you to formulate your own concepts, and give you ideas of what to include to wow the recruiter.

Pick the Right Plumbing Vocational School near Addison AL

Choosing the right plumbing trade school will probably be the most critical decision you will make to start your new profession. As we have discussed in this article, there are many things that you will need to assess and compare between the schools you are looking at. It’s a must that any plumber training program that you are assessing includes a considerable amount of hands-on training. Classes need to be smaller in size and every student must have their own equipment to train with. Classroom instruction needs to provide a real-world perspective, and the course of study should be current and in-line with industry standards. Programs vary in length and the kind of credential provided, so you will have to determine what length of program and credential will best serve your needs. Each training program offers different options for certification as well. Probably the best way to research your short list of schools is to go to each campus and talk with the teachers and students. Invest some time to monitor a few classes. Tour the campus and facilities. Make sure that you are confident that the training program you pick is the ideal one for you. With the proper training, effort and commitment, the end result will be a new trade as a professional plumber in Addison AL.

Background on Addison Alabama

Addison Timlin

Addison Jayne Timlin (born June 29, 1991) is an American actress, best known for her roles as Jami Lerner in The Town That Dreaded Sundown (2014) and Colleen Lunsford in Little Sister (2016).[1] She is also known for playing Sasha Bingham in Showtime's Californication.[2]

Born in Philadelphia, Pennsylvania, Timlin debuted on the big screen as Amy, a 14-year-old girl with diabetes, in the 2005 film Derailed alongside Clive Owen and Melissa George, who played her parents.[3] Timlin played Maddy in a short film, The Isabel Fish, directed by Lara Zizic for the Columbia Film Festival. In 2007, Timlin appeared in the music video, "Sleeping Lessons," by Albuquerque, New Mexico based indie-rock band, The Shins. In 2008, she made an appearance in the music video for the song Check Yes Juliet by We the Kings, playing the fictional Juliet. She was cast in the short-lived CBS television drama, 3 lbs, as Charlotte Hanson (the daughter of the main character played by Stanley Tucci), in three of the eight episodes that were filmed. Timlin is seen in the short film Man, written and directed by Myna Joseph, which was screened at the Sundance Film Festival and at Cannes.[4] In 2008 she played Emily Draper in the ABC television show, Cashmere Mafia, the troubled teenage daughter of Juliet Draper (Miranda Otto).

Timlin was cast in Day One, an NBC midseason replacement TV series which was cut down to a mini-series that never aired.[5][6] In the fourth season of Californication she portrayed an actress.[2] Timlin appeared in an indie film called Best Man Down which starred Justin Long.[7] She played the female lead, Stormy Llewellyn, in Stephen Sommers' adaptation of the first book of Dean Koontz's Odd Thomas series, opposite Anton Yelchin as Odd.[8][9] In February 2012, Timlin was cast in ABC's drama pilot, Zero Hour, which was picked up as a mid-season replacement and premiered in February 2013.[10] In May that same year, Timlin joined the cast of the indie romantic comedy, The Bounceback.[11] In 2013, Timlin appeared in the action-comedy Stand Up Guys, which starred Al Pacino, Christopher Walken and Alan Arkin.

Timlin was cast as Lucinda "Luce" Price in 2016's Fallen, adapted from Lauren Kate's novel.[12]

 

 

The location could not be found.

A Few More Cities in Alabama

  • Plumbing Training Schools near Grove Hill AL 36451
  • Plumbing Training Schools near Eastaboga AL 36260
  • Plumbing Training Schools near Montgomery AL 36101
  • Plumbing Training Schools near Eight Mile AL 36613
  • Plumbing Training Schools near Morris AL 35116
  • Plumbing Training Schools near Jack AL 36346
  • Plumbing Training Schools near Butler AL 36904
  • Plumbing Training Schools near Hatchechubbee AL 36858
  • Plumbing Training Schools near Sulligent AL 35586
  • Plumbing Training Schools near Brookwood AL 35444
  •  

     

    Business Results 1 - 5 of 1

    Stegall Mechanical
    2 Reviews
    Plumbing, Heating & Air Conditioning/HVAC
    Phone:
    2800 5th Ave S, Birmingham, AL 35233